Publication 2711C-UM001I-EN-P - July 2014 23
Configuration Mode Chapter 2
Adjusting Settings on the PanelView Explorer Startup Window
From the PanelView Explorer Startup window, you can view and edit settings for
the connected PanelView Component terminal. The settings take effect
immediately.
By clicking the Terminal Settings link on the PanelView Explorer Startup
window, you can access tabs to:
• adjust the display brightness and contrast.
• configure screen saver settings.
• configure key repeat settings.
• calibrate the touch screen (if supported).
• reset the terminal.
• view system information.
• change the startup application.
• change the terminal language.
• change the current date and time.
• Ethernet communication.
• change the password of the system administrator.
Most of these settings are also adjusted from configuration mode on the terminal.
To Next Page
Loading...
Need help?
General
