Publication 2711P-UM001A-EN-P
Using Configuration Mode 4-37
Regional Settings
The Regional Settings screen allows you to access these screens:
• Language
• Numeric Format
• Long Date Format
• Short Date Format
• Time Format
The current language is shown at the bottom of the Regional Settings
screen.
Language
The Language screen allows you to select a language that is installed
on the PanelView Plus. Languages are installed as a part of the
operating system.
Numeric Format screen
The Numeric Format Screen allows you to modify the decimal
separator used by the current language. The default decimal separator
is ".". The field will accept a separator up to 3 characters.
Terminal Settings
Time/Date/Regional Settings
Regional Settings
Terminal Settings
Time/Date/Regional Settings
Regional Settings
Language
Terminal Settings
Time/Date/Regional Settings
Regional Settings
Numeric Format
AB PLCs
To Next Page
Loading...
Need help?
General
