Allen-Bradley powerflex 700 Reference Manual

Parameter Access Level 2-129
Parameter Access
Level
The PowerFlex 70 allows the user to restrict the number of parameters that
are viewable on the LCD or LED HIM. By limiting the parameter view to
the most commonly adjusted set, additional features that may make the
drive seem more complicated are hidden.
If you are trying to gain access to a particular parameter and the HIM skips
over it, you must change the parameter view from “Basic” to “Advanced.”
This can be accomplished in two different ways:
• Press “Alt” and then “View” from the HIM and change the view.
or
• Reprogram Parameter 196 [Param Access Lvl] to “Advanced”.
PET Pulse Elimination Technique – See Reflected Wave on page 2-152.

Allen-Bradley powerflex 700 Specifications

General

Series	PowerFlex 700
Category	AC Drive
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC
Enclosure	Type 1
Control Method	Sensorless Vector
Communication	EtherNet/IP, ControlNet, DeviceNet, PROFIBUS DP, Modbus