xv
053383; 09/16
EC Declaration of Conformity
EC Declaration of Conformity
with the
European Machinery Directive 2006/42/EC
We hereby declare that the machinery stipulated below complies with all the relevant provisions of the
EC Machinery Directive and the UK National Laws and Regulations adopting this Directive.
Modifications to the machine without prior approval from the undersigned will render this declaration
null and void.
Manufacturer: Allen Engineering Corporation
819 South 5th St., Paragould, AR 72450 USA
Authorised Representative in EU: Mr. Thomas Voeler, ab lin-pro
Femvägsskälet 3, 421 50 Västra Frölunda. Sweden
Equipment: MP235 Riding Trowel
Description: Ride-on, IC engine powered, concrete smoothing machine.
Notified Body: Not required.
Harmonized Standards Applied: EN12649
Person empowered to draw up the declaration: Jay Allen Signature:
Position: President
Place of issue: 819 South 5th St., Paragould, AR 72450 USA
Date: 1/24/2011
To Next Page
Loading...
