2-3
053383; 11/10
SECTION 2
OPERATIONS
2.1
Introduction
2.1.1 Description
The MP235 riding trowel is a modern high production machine. Finishing rates
will vary depending on the operators skill and job conditions. This riding trowel has
eight finishing blades.
The standard duty gearboxes are designed to provide exceptional performance
with low maintenance and trouble free use under some of the worst conditions.
All Allen Engineering MP235 are equipped with a safety shutdown
switch and a low oil warning light for added job safety and engine protection.
Operating time between fuel refills is approximately 2-1/2 to 3 hours with a rotor
speeds of 110 to 135 RPM.
The MP235 Riders are the most technically advanced riding trowels on the
market today. With proper maintenance and use, your riding trowel will provide you
with exceptional service and dependability.
To Next Page
Loading...
