allen MSP445 - Technical Specifications

x
053430; 01/11
Technical Specifications
Measurements in this manual are in U.S. units and their customary metric units (i.e., metric units
contained within brackets [8 mm]). The machine RIGHT-HAND and LEFT-HAND sides are deter-
mined by sitting on machine (SOM) facing in the direction the machine will travel when going
forward.
Machine Features:
• Dimensions - NOL (L x W x H) inch [mm] .............101.5x50.5x59.5
(guardrings/top of seat) ...........................[2578.1x1282.7x1511]
• Operating Weight lb [kg] ..........................
• Panning Path Width inch [mm] .....................95 [2413]
• Two Rotors (Diameter) inch [mm] ...................46 [1168]
• Rotor Speed (RPM) ..............................165 - 170
• Finish Blade (10) inch [mm] ........................6 x 18 [15x45]
• Gearbox (2) ....................................Super Heavy Duty (SHD)
• Welded Guard Ring ..............................Standard
• Flip-Up Seat Frame ..............................Standard
• Operator Control Panel ...........................Standard
• Powered Retardant Spray System ..................Standard
• Spray System Capacity gal [L]. . . . . . . . . . . . . . . . . . . . . .6 [23]
• Steering System .................................Dual Levers
• Gearbox Rotation ................................Standard
• Battery ........................................12 V
• Safety Shutdown Switch ..........................Operator Seat
• Fuel Capacity gal [L] .............................6 [23]