052793 - 03/2013
SECTION 2
OPERATIONS
Page 2-5
Operating Instructions
With the operator in the seat, show them the functions of the joysticks [B] and [C] and how to start the
machine.
A hard level concrete slab with water on the surface is an ideal place for an operator to practice with the
machine. For practice pitch the blades up approximately 1/4 inch on the trailing edge. Start by making
the machine hover in one spot and then practice driving the machine in a straight line and making 180
degree turns. Best control is achieved at full engine RPM.
After starting engine fully engage the throttle. This allows the engine to warm up quicker and also en-
gages the torque converter. At this time the machine’s rotors will begin turning.
DO NOT use excessive pressure on the joysticks. Excessive pressure does not increase the reaction
time of the machine and can damage steering controls.
Stopping The Riding Trowel
To stop the trowel’s movement, let go of the joysticks [B] and [C]. They will return to their neutral posi-
tion. Also release pressure on the right foot pedal [E].
This machine has a kill switch mechanism installed in the left foot pedal. If in need of an emergency
stop, simply lifting the foot off of the pedal will turn the engine off completely.
To Next Page
Loading...
