allen MSP455 - Maintenance Schedule

052793 - 03/2013
SECTION 3
SERVICE
Page 3-6
Maintenance Schedule
Item Daily Weekly Monthly Annually 100 Hours
Check external hardware
ü
Check hydraulic oil level
ü
Check hydraulic ttings and hoses
ü
Apply grease to thrust bearings
ü
Check all operational controls
ü
Tighten all bolts and nuts.
ü
Grease steering assembly heim joints
ü
Tighten any loose bolts, nuts, etc
ü
Inspect visually for loose or missing parts
ü
Wash wet concrete of machine
ü
Clean fuel sediment bowl
ü
Inspect battery (ll with water if needed)
ü
Change gearbox oil
ü
Inspect drive belts
ü
Check all adjustments
ü
Change the engine oil
ü
Check air cleaner element
ü
Thoroughly clean machine
ü
Change the hydraulic oil
ü
Maintenance Schedule