allen PRO 430 - Gear Box W; Special Shaft (TC) Parts List

4-43
055561; 01/12
SECTION 4
PARTS
4.14 Parts List
Gear Box w/ Special Shaft (TC)
ITEM PART # DESCRIPTION QTY
1 001003 GREASE, MOBILITH SCH220 .094
2 048299 OIL, ALLEN ENGINEERING GEARBOX .757/LT
3 010498 PLUG, 3/8 NPT BI SQ HD PIPE 2
4 010513 FITTING, 1/4-28 NPT STR GREASE 1
5 012953 PLUG, 3/4 NPTF BI SQ HD PIPE 1
6 015204 GEAR BOX,MACHINE FINISHED 1
7 015205 FSTN, SCREW FHSSS 5/16-18 X 1 8
8 015209 VALVE 1/8 NPT-27 RELIEF 1
9 015210 GASKET .005 THICK, TOP COVER AS REQ.
10 015212 FSTN, SCREW FHSS 3/8-16 X 1 LH 1
11 015213 WASHER PRESSURE 1
12 015216 GEAR,BRONZE RH 1
13 015217 BEARING, RADIAL BALL 1
14 015219 SHAFT, MAIN MACH FINISHED 1
15 015221 CAP, GEAR BOX END 1
16 015222 GASKET, END CAP & FLANGE .005 AS REQ.
17 015660 O-RING, GEAR BOX END CAPS 2
18 015663 BEARING ANGULAR CONTACT 1
19 015670 SEAL, OIL CR# 7455V 1
20 015671 SEAL, OIL CR# 13661 1
21 015672 GAUGE, 3/4-14 NPT PORTHOLE VIEW 1
22 015673 O-RING, 15/16x1-3/16x1/8 BUNA 1
23 015696 KEY, .25x1.25 LG HARD RAD 1
24 017314 FSTN, SHCS 1/4-20 X 5/8 8
25 020018 GASKET .003 THICK, TOP COVER AS REQ.
26 022073 BEARING TAPERED ROLLER 1
27 022074 BEARING RACE 1
28 022185 GASKET, END CAP & FLANGE .002 AS REQ.
29 022186 GASKET, END CAP & FLANGE .003 AS REQ.
30 015208 COVER-GEAR BOX MACH. FINISHED 1
31 055646 SHAFT, INPUT RH GEAR BOX (TEXAS) 1
32 032745 PLUG, PLASTIC 1/8" P18-27 (TRANSPORT ONLY) 1
33 015223 FLANGE, GEAR BOX (4 HOLE) 1
34 015668 BEARING, TAPERED ROLLER 1
35 015669 BEARING RACE 1
36 048340 DECAL, ALLEN ENGR GEARBOX 1