EasyManua.ls Logo

Alliance Laundry Systems Dryer Tumblers User Manual

Alliance Laundry Systems Dryer Tumblers
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation/Operation Supplement
Part No. 70392201R8
September 2008
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Drying Tumblers
25 Pound Capacity
30 Pound Capacity
35 Pound Capacity
Stacked 30 Pound Capacity
Stacked 45 Pound Capacity
55 Pound Capacity
Starting Serial No. 0602004144
Refer to page 3 for Model Identification
Question and Answer IconNeed help?

Do you have a question about the Alliance Laundry Systems Dryer Tumblers and is the answer not in the manual?

Alliance Laundry Systems Dryer Tumblers Specifications

General IconGeneral
BrandAlliance Laundry Systems
CategoryDryer
Drum MaterialStainless Steel
CapacityVaries by model
Heat SourceElectric or Gas
Control TypeElectronic or Mechanical
Energy EfficiencyVaries by model
WarrantyVaries by model
ControlsVaries by model
ReversingYes
Lint FilterYes
Dryer TypeCommercial Dryer

Summary

Introduction

Model Identification

Information applicable to specific dryer models.

Serial Plate Location

Wiring Diagram

Information regarding the electrical wiring diagram of the unit.

Safety Information

Important Safety Instructions

Crucial safety precautions to prevent injury or damage.

Installation

Specifications and Dimensions

Technical specs and physical measurements for different dryer models.

Cabinet Dimensions – 25, 30, 35 and 55 Pound Models

Physical dimensions for specific tumbler capacity models.

Cabinet Dimensions – T30 and T45 Models

Physical dimensions for T30 and T45 tumbler models.

Exhaust Outlet Locations

Diagrams and measurements for dryer exhaust ports.

Gas Connection Locations

Diagrams and measurements for gas supply connections.

Electrical Connection Locations

Diagrams and measurements for electrical power connections.

Steam Connection Locations

Diagrams and measurements for steam supply connections.

Position and Level the Tumbler

Instructions for correctly positioning and leveling the dryer.

Gas Requirements

Natural Gas and Liquefied Petroleum

Requirements for natural gas and L.P. gas connections.

European Gas

Specific gas requirements for European installations.

Gases and Configurations

Details on gas types, configurations, and burner orifices.

Exhaust Requirements

Make-Up Air

Details on required airflow to replace exhausted air.

Venting

Recommendations for safe and effective dryer exhaust ducting.

Electrical Requirements

Grounding Instructions

Procedure for correctly grounding the tumbler for safety.

Steam Requirements

Operation

Emergency Stop Button

How to use the emergency stop button for immediate shutdown.

Operating Instructions

Step-by-step guide for basic tumbler operation.

Control Instructions

Overview and instructions for various control panel types.

Dual Digital Timer Control

Operation of the dual digital timer control system.

Electronic OPL Micro Control

Operation of the electronic OPL micro control system.

Single Drop Control

Operation of the single drop control system.

MDC Coin and Card Control

Operation of the MDC coin and card control system.

Ignition Control Operation

Flame Probe Tests

Tests related to flame detection for ignition control.

Flame Monitoring

Process of monitoring the flame during operation.

Diagnostic LED / Error Codes

Explanation of diagnostic LED colors and error code meanings.

Disposal of Unit

Related product manuals