EasyManua.ls Logo

Alliance Laundry Systems DTB75CG User Manual

Alliance Laundry Systems DTB75CG
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation/Operation/Maintenance
Drying Tumblers
30 Pound Capacity (28" Wide)
30 Pound Capacity (31.5" Wide)
50 Pound Capacity
75 Pound Capacity
120 Pound Capcity
170 Pound Capacity
Model Numbers in this manual
are shown on page 5
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
(If this tumbler changes ownership, be sure this manual accompanies
the tumbler.)
Part No. M413620R3
November 1998
NOTA: El manual en
español aparace después
del manual en inglés.

Table of Contents

Other manuals for Alliance Laundry Systems DTB75CG

Question and Answer IconNeed help?

Do you have a question about the Alliance Laundry Systems DTB75CG and is the answer not in the manual?

Alliance Laundry Systems DTB75CG Specifications

General IconGeneral
BrandAlliance Laundry Systems
ModelDTB75CG
CategoryDryer
LanguageEnglish

Summary

Section I: Safety

General Safety Instructions and Warnings

Critical safety instructions, warnings, and precautions for operating and installing the tumbler.

Section II: Introduction

Model Identification and Specifications

Details model applicability, nameplate location, parts ordering, and roughing-in dimensions.

Section III: Installation Instructions

Receiving, Positioning, and Leveling

Procedures for unpacking, moving, and leveling the tumbler before installation.

Venting, Airflow, and Make-Up Air

Guidelines for tumbler enclosures, exhaust ducting, and make-up air requirements.

Gas, Steam, and Electrical Connections

Requirements and procedures for connecting gas, steam, and electrical services to the tumbler.

Section IV: Adjustments

Burner, Airflow, and Door Switch Adjustments

Procedures for adjusting the gas burner air shutter, airflow switch, and door mechanisms.

Drive System Adjustments

Instructions for adjusting belt and chain drive tensions for proper operation.

Section V: Operating Instructions

Basic Tumbler Operation

Operating procedures for manual timer, coin-operated, and reversing tumblers.

Electronically Controlled OPL Tumbler Operation

Comprehensive guide for operating OPL micro-control tumblers, including cycles and settings.

Section VI: Preventive Maintenance Instructions

Daily and Periodic Maintenance

Schedule and procedures for daily lint removal and periodic checks and lubrication.

Energy Saving and Troubleshooting

Tips for energy efficiency and guidance on diagnosing and resolving common tumbler issues.

Related product manuals