EasyManua.ls Logo

Alliance Laundry Systems DTB634 User Manual

Alliance Laundry Systems DTB634
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation/Operation/Maintenance
Drying Tumblers
30 Pound Capacity (28" Wide)
30 Pound Capacity (31.5" Wide)
50 Pound Capacity
75 Pound Capacity
120 Pound Capcity
170 Pound Capacity
Model Numbers in this manual
are shown on page 5
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
(If this tumbler changes ownership, be sure this manual accompanies
the tumbler.)
Part No. M413620R3
November 1998
NOTA: El manual en
español aparace después
del manual en inglés.

Table of Contents

Other manuals for Alliance Laundry Systems DTB634

Question and Answer IconNeed help?

Do you have a question about the Alliance Laundry Systems DTB634 and is the answer not in the manual?

Alliance Laundry Systems DTB634 Specifications

General IconGeneral
BrandAlliance Laundry Systems
ModelDTB634
CategoryDryer
TypeCommercial
Capacity (cu. ft.)7.0
Capacity (lbs)30
Door SwingReversible
Phase1
Heating SourceElectric
Control TypeTimer
Fuel TypeElectric

Summary

Safety and Important Instructions

General Safety Warnings

Critical warnings regarding installation, maintenance, and operation risks.

Important Safety Instructions

Key safety precautions to minimize the risk of fire, electric shock, injury or death.

Introduction and Model Information

Model Identification and Reference

Lists applicable tumbler models, part numbers, and provides space for recording appliance details.

Nameplate Location and Dimensions

Illustrations showing nameplate location, cabinet dimensions, and exhaust thimble data.

Connection Location Details

Specifications for steam, gas, and electrical connection points for various tumbler models.

Tumbler Specifications Overview

Technical specifications for 30 lb gas and electric tumblers, including dimensions and consumption.

Installation Procedures

Receiving Inspection and Materials

Procedure for inspecting the tumbler and listing required installation materials.

Tumbler Positioning and Leveling

Guidelines for placing and ensuring the tumbler is level for proper operation.

Enclosure and Venting Requirements

Requirements for tumbler enclosure construction, clearances, venting, and make-up air.

Gas and Steam Requirements

Gas Supply Piping and Pressure

Details on gas supply piping, pressure requirements, and connection diagrams.

Steam Supply Piping and Pressure

Guidelines for steam piping, pressure, and condensate return connections.

Adjustments

Burner Air Shutter and Air Flow Switch

Steps to adjust the main gas burner air shutter and the air flow switch.

Cylinder Door Switch and Strike

Adjusting the cylinder door switch and strike for proper safety and closure.

Operating Instructions

Manual Timer and Coin-Operated Models

Operating procedures for manual timer and coin-operated tumbler models.

Electronically Controlled OPL Tumbler

Overview of operating electronically controlled OPL tumblers and control panel functions.

Preventive Maintenance Schedule

Daily Lint Removal

Procedure for daily lint removal from the screen and compartment.

Periodic Maintenance Tasks

Monthly, three-month, and six-month maintenance tasks including checks and cleaning.

Related product manuals