Alliance Laundry Systems HCD020GD2 - Operation; Operating Instructions

11
F8208401ENR5
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
Operating Instructions
1. Turn on main power source (circuit breaker).
2. Turn handle clockwise to open. Refer to
Figure 3.
NOTE: For 125 capacity models through 1/31/11,
press the Unlock/Stop keypad, push the button on
door handle and turn handle counter clockwise to
open.
For 125 capacity models starting 2/1/11, turn
handle clockwise to open.
Figure 3
3. Load to capacity whenever possible. DO NOT
OVERLOAD. Refer to Figure 4.
NOTE: Underloading can cause out-of-balance
conditions that can shorten machine life.
Figure 4
4. Close door and turn handle counter clockwise.
Refer to Figure 5.
NOTE: For 125 capacity models through 1/31/11,
close door and turn handle clockwise.
For 125 capacity models starting 2/1/11, close door
and turn handle counter clockwise.
Figure 5
5. The default wash cycle will display.
6. Select the desired soil setting (select models
only), cycle setting (select models only) and
cycle/temperature. The LED indicator(s) for that
cycle will light.
CHM2243N
U003I
CHM2243N
CHM2244N
To prevent personal injury, avoid contact
with inlet water temperatures higher than
125° Fahrenheit (51° Celsius) and hot
surfaces.
W748
WARNING