Alliance Laundry Systems UW60B2 - Operation - Display Indicator Guide (Cont.); Display Indicator Meanings - Part 2

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
F232223
18
Table 2 (Continued)
Display Meaning
___F
The first 3 digits are reserved for temperature reading, F indicates “degrees Fahrenheit”
FILL
“Fill error” – machine did not fill to programmed water level within 10 minutes; also
displays during Rapid Advance Mode
door
“Door” opened during cycle
USH1
“Wash 1” segment
USH2
“Wash 2” segment
USH3
“Wash 3” segment
USH4
“Wash 4” segment
rIn1
“Rinse 1” segment
rIn2
“Rinse 2” segment
rIn3
“Rinse 3” segment
rIn4
“Rinse 4” segment (final rinse)
donE
Cycle has concluded
drAI
Drain selected for segment; also indicates in drain step during 2 speed version test cycle or
during Rapid Advance Mode
----
Flashes for a period of time (for safety) after power up while keeping outputs OFF
Erdn
Drain error or drain count error (will display in certain models)
ErFL
Fill error count (will display in certain models)
Adv
Machine set up for Rapid Advance
noAd
Machine is not set up for Rapid Advance
E Pr
The number of times power has been interrupted during a cycle
CyC
Cycle counter