Alliance Laundry Systems UX55PVXF6 - Insert a Step

Programming
23
9002101
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Insert a Step
To edit a cycle, enter the cycle number
(example: cycle 51).
Press the “Edit Cycle” button.
Press the “Enter” button to edit the cycle.
Press “Enter” to continue.
The first step of cycle 51 will display.
Select the position where you would like to add a step
by using the “Advance” button to go to the next step or
the “Previous” button to go to the previous step.
Push the “Add Step” button to add a step.
The control will insert a step before the step selected.
Select the function (example: supply).
Press the supply number (example: supply 7).
Program Cycle 00
Program Cycle 51
Edit Cycle 51
Name Cycle 51:
Cycle 51
Step 01 Cycle 51
Warm Low
Step 02 Cycle 51
Wash 1 18/3
Step 02 Cycle 51
Step 02 Cycle 51
Supply