To Next PageTo Next Page
Need help?Do you have a question about the ALLIANCE HWNNX2SP115CW01 and is the answer not in the manual?
Details the advanced programmable computer and its features for controlling the washer.
Explains how the control saves cycle status during power failures and resumes operation.
Covers manual, infra-red, card reader, and network communication methods for programming.
Describes pads used to select specific washer cycles like NORMAL, PERM PRESS, and DELICATES.
Details pads for selecting water temperature (HOT, WARM, COLD) for the wash fill.
Explains the pad used to select cycle modifier options like LIGHT, MEDIUM, and HEAVY.
Information on LEDs used to indicate chosen cycle and cycle status.
Describes the use of 7-segment digits for time, vend price, and error messages.
Details the mode when the vend price is satisfied or zero, indicating the cycle is ready.
Explains the control's response when the washer lid is opened during various cycle stages.
Instructions on how to change cycles and temperatures before the first fill.
Describes the control's behavior when an overflow level is detected in the washer.
Explains how to prevent machine use by specific users during programmed times.
Details the mode entered based on Low Power/Auto-Shutdown options and programmed times.
Allows owners to program cycle info, vend pricing, special vends, and run diagnostics.
Enables owners to run specific diagnostic tests on washer operations.
Allows quick advancement through an active cycle or into a cycle from Ready Mode.
Allows programming programmable vend prices for specific hours and dates.
Enables starting a cycle without satisfying the vend price.
Allows owners to indicate the machine is not available for use.
Manual programming for coin models, requiring service door and coin vault switch.
Manual programming for card reader models, involving unplugging a connector.
Step-by-step instructions on how to access Manual Mode for programming and testing.
Overview of the five groups within Manual Mode: Programming, Audit, Reset, Rapid Advance, Diagnostics.
Details features programmable via keypad, including cycle info, vend pricing, and special vends.
Lists and describes all available programming options for the control.
Sets the duration the control stores active cycle info during a power failure.
Enables or disables the rapid advance feature for quick cycle progression.
Enables or disables the manual diagnostics option for testing.
Enables or disables access to Factory Test mode for diagnostics.
Sets the vend price for NORMAL HOT cycles, to be set before other prices.
Sets the vend price for NORMAL WARM cycles.
Sets the vend price for DELICATES COLD cycles.
Enables a decimal point display for vend prices at two locations.
Sets the numerical value for a coin entered in the first coin drop.
Sets the numerical value for a coin entered in the second coin drop.
Programs the value of the Start Pulse if used with aftermarket systems.
Sets the default cycle that the machine enters in Ready Mode.
Programs when signals may sound during washer operation.
Allows owners to turn on or off certain error codes in the control.
Allows setting the control's internal clock to the correct time and date.
Allows setting the control's internal clock to daylight savings time and date.
Sets the minute for the start of Special Vend 1.
Sets the month for the start of Special Vend 1.
Adds time to agitate steps that have wash selected as their status.
Sets the default cycle modifier (LIGHT, MEDIUM, HEAVY) upon entering Ready Mode.
Allows setting time for various steps in each type of cycle.
Instructions on how to scroll through and read audit data options.
Procedure to reset the washer control's programming to factory defaults.
Steps to enter the testing mode to run diagnostic tests on washer operations.
Instructions on how to initiate a specific diagnostic test using the reference chart.
Detailed descriptions of various diagnostic tests available for the washer.
Tests the service door switch status (open or closed).
Tests the coin vault switch status (open or closed).
Tests the machine's water removal capabilities by energizing valves, spin, and pump.
Checks for water leaks by monitoring water level changes during a cycle.
Shows machine configuration values related to connected components.
Instructions on how to access Factory Test mode for machine diagnostics.
Steps to activate the Rapid Advance feature for quick cycle progression.
Allows clearing the control when satisfying vend price and resetting to ready mode.
Allows control communication with external devices via infra-red.
Enables control communication with a network for programming and data reading.
General