To Next PageTo Next Page
Need help?Do you have a question about the ALLIANCE SWNNC2HP115TW02 and is the answer not in the manual?
General| Brand | Alliance |
|---|---|
| Model | SWNNC2HP115TW02 |
| Category | Washer |
| Type | Commercial |
| Loading Type | Top Load |
| Energy Star Certified | No |
| Phase | 1 |
| Hertz | 60 |
| Extraction Speed | 710 RPM |
| Water Level Selection | Yes |
| Control Type | Electronic |
| Programs | 8 |
| Construction | Stainless Steel |
| Voltage | 115V |
| Amperage | 15 Amps |
How the control saves cycle status during power interruptions.
Owner programs cycles, vend prices, and tests via keypad.
Signals alarm if service door or coin vault opened without disabling.
Retrieving stored audit information by pressing keypad combinations.
Programs programmable vend prices for specific hours and dates.
Running diagnostic tests on washer operations and controls.
Allows starting a cycle without satisfying the vend price.
Limits machine use to attendant without requiring vend.
Programs control to shut down based on programmable times/dates.
Machine control communication with external devices, card readers, or networks.
Disables machine use by displaying an out of order message.
Step-by-step guide to access Manual Mode for programming/testing.
Overview of Manual Mode groups: Programming, Audit, Reset, Advance, Diagnostics.
Programming cycles, vend pricing, special vends, and other features.
Detailed list and description of all programmable options and their settings.
Methods to enter Audit Feature: Manual Mode or Coin Vault Open.
Steps to scroll through options and view audit data.
Steps to reset control programming to factory defaults.
Steps to access diagnostic tests for washer operations.
Procedure to initiate a diagnostic test using the Quick Reference Chart.
Procedure to enter Factory Test mode.
Reference chart for Factory Test display, mode, and comments.
List of possible error codes, their descriptions, and causes/corrections.
