EasyManuals Logo

Allied Systems W3C User Manual

Default Icon
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
viii
Never stand nor permit others to stand in the bight
(loop) of a wire rope.
Do not stand nor permit others to be near the winch
or wire rope when there is tension on the wire rope.
Observe jobsite rules.
Be in complete control at all times.
Do not use the control levers as hangers for clothes,
water bags, grease guns, lunch pails, etc.
Do not leave the vehicle when the winch wire rope
is under tension.
Do not permit riders on the vehicle or load.
Do not use the winch as an anchor for a double or
two-part line.
Do not pull the hook through the throat or over the
drum, which will cause damage.
When the winch is not in use, make sure the control
lever is in BRAKE-ON position and the winch brake
is applied.
Do not use winch as a hoist. Tractor and skidder
mounted winches are designed for towing.
Always inspect wire rope, tail chain and other rigging
components for wear, damage, broken strands or
abuse before use.
Never use wire rope, tail chain or other rigging that
is worn-out, damaged or abused.
Never overload wire rope, tail chain or rigging.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Systems W3C and is the answer not in the manual?

Allied Systems W3C Specifications

General IconGeneral
BrandAllied Systems
ModelW3C
CategoryWinches
LanguageEnglish

Related product manuals