Network Adapter Card Installation Guide
103
Magic Packet Enables and disables the Wake on LAN
feature on the adapter. This feature
powers ON a system that has been
powered OFF or is in a sleep mode,
whenever the network adapter card
receives a magic packet from a
management application program.
Possible settings are:
On: Enables the feature.
Off: Disables the feature. This is the
default setting.
For background information, refer to
“Wake on LAN” on page 35
Network Address (LAA) Specifies a locally administered address
(LAA) for the network adapter card. You
can use this parameter to assign the card
a new MAC address that overrides the
address assigned to it by Allied Telesyn.
This parameter is seldom used and
should be used with caution.
Table 11. Advanced Tab Parameters in the Network Adapter Card
Properties Window (Continued)
Property Definition
To Next Page
Loading...
Need help?
General
