Network Adapter Card Installation Guide
23
Type of Cabling 50/125 or 62.5/125 micron (core/
cladding) multimode fiber optic
cable
Operating Specifications Wavelength: 1310 nm
Output power - 50/125 micron
cabling:
Minimum: -22.5 dBm
Maximum: -14 dBm
Output power - 62.5/125 micron
cabling:
Minimum: -19.0 dBm
Maximum: -14 dBm
Input sensitivity:
Minimum: -31 dBm
Maximum: -14 dBm
Wake on LAN Feature
AT-2700FX Series Supported
AT-2701FX Series Supported
Default Setting Disabled
BootPROM Chip and MBA Feature
AT-2700FX Series Optional
AT-2701FX Series Standard
Load Balancing and Fail-over Protection
AT-2700FX Series Not supported
AT-2701FX Series
Supported
2
Default setting: Disabled
1. Numerous factors, such as too many splices or poorly implemented splices,
can significantly reduce the maximum distance of a fiber optic port. Fiber optic
cable should only be installed by a qualified fiber optic cable contractor.
2. Microsoft Windows 2000, 2003, and XP.
Table 4. AT-2700FX and AT-2701FX Series Network Adapter
Cards (Continued)
To Next Page
Loading...
Need help?
General
