Network Adapter Card Installation Guide
19
Wake on LAN Feature
AT-2450FTX Series Supported on twisted pair port
only.
AT-2451FTX Series Supported on both twisted pair
port and fiber optic port.
Default Setting Disabled
BootPROM Chip and MBA Feature
AT-2450FTX Series Optional
AT-2451FTX Series Standard
Default Port 10/100Base-TX
Load Balancing and Fail-over Protection
AT-2450FTX Series Not supported
AT-2451FTX Series
Supported
2
Default setting: Disabled
1. Numerous factors, such as too many splices or poorly implemented splices,
can significantly reduce the maximum distance of a fiber optic port. Fiber optic
cable should only be installed by a qualified fiber optic cable contractor.
2. Microsoft Windows 2000, 2003, and XP.
Table 2. AT-2450FTX and AT-2451FTX Series Network Adapter
Cards (Continued)
To Next Page
Loading...
Need help?
General
