Allied Telesis AT-2400T User Manual

Network Adapter Card Installation Guide
67
The Run window is shown in Figure 23.
Figure 23. Run Window
3. In the Open field, type: x:\Win_XP_200X\atsetup where ‘x’ is the drive
letter of the floppy drive.
4. Select OK.
5. To complete the installation of the adapter card driver, perform Steps 8
to 11 in the procedure “Running AT-Setup from the Installation CD” on
page 60.

Allied Telesis AT-2400T Specifications

General

Brand	Allied Telesis
Model	AT-2400T
Category	Adapter
Language	English