Chapter 3: Microsoft Windows 2000, 2003, and XP
76
13. If you are installing the LBFO driver, a message is displayed stating
that the driver has not been certified by Microsoft. If you see the
message, click Continue Anyway.
The wizard installs the adapter driver. The installation process can
take up to 30 seconds to complete.
Once installed, the window in Figure 35 is displayed.
Figure 35. Found New Hardware Wizard Window (4 of 4)
14. Select Finish.
15. Reboot your system.
This completes the procedure for manually installing the driver on a
Microsoft Windows 2000, 2003, or XP system. To adjust the adapter’s
parameters, refer to “Configuring the Network Adapter Card Settings”
on page 91.
To Next Page
Loading...
Need help?
General
