Installation and Safety Guide
5
The following items are shipped with each switch. Contact your authorised
distributor or reseller if any are damaged or missing.
All models ship with:
■ one cable for connecting the switch to a terminal or PC
■ two rack-mount brackets
■ depending on the switch, an appropriate number of M4 screws for
rack-mount brackets
■ this Installation and Safety Guide
■ one warranty card
All models except the SwitchBlade x908 also ship with:
■ AC power cord(s) (AC models only)
■ one power cord retaining kit (AC models only)
• 1 retaining clip
• 2 retaining plates
•2 screws
■ depending on the switch, four or five rubber feet with screws for mounting
the switch on a level surface
Some products also ship with a Documentation and Tools CD-ROM containing
documentation and utilities. For more information, see “Obtaining
Documentation and Resources” on page 30.
To Next Page
Loading...
