Allied Telesis AT-9924T Installation And Safety Guide

x900 Series Switch and SwitchBlade
®
x908
10
Fitting a bracket on a SwitchBlade x908 switch
Fitting a bracket on all other x900 Series switches
5. Mount the switch into the rack from the front, and tighten the rack-mount
screws.
Two people are required at this point. One person can lift the switch into
the rack and attach it to the front rails while the second person safely
supports it from the rear.

Allied Telesis AT-9924T Specifications

General

Brand	Allied Telesis
Model	AT-9924T
Category	Switch
Language	English