Chapter 1: Product Description
22
Features
This section lists the main features of the AT-TQ5403 access point.
Hardware
Features
The hardware features are as follows:
Triple radio is supported. The supported frequency ranges may
vary depending on the region’s regulations. For example:
- USA:
2.4GHz (2412-2462 MHz)
5GHz (5150-5250 MHz, 5725-5850 MHz)
- Japan:
2.4GHz (2400-2483.5 MHz)
5GHz (5150-5250 MHz, 5250-5350 MHz, 5470-5725 MHz)
- Europe:
2.4GHz (2412-2472 MHz)
5GHz (5150-5250 MHz, 5250-5350 MHz, 5470-5725 MHz)
- AS/NZS:
2.4GHz (2412-2472 MHz)
5GHz (5150-5250 MHz, 5250-5350 MHz, 5470-5725 MHz,
5725-5850 MHz)
LAN 1 Port - one fixed 10/100/1000Base-T RJ-45 port receiving
Class 4 PD PoE+ power and transmitting/receiving Ethernet data.
LAN 2 Port - one fixed 10/100/1000Base-T RJ-45 port.
Each port auto-negotiates wire speed, duplex, and MDI / MDIX
settings.
IEEE 802.3 (10Base-T)
IEEE 802.3u (100Base-TX)
IEEE 802.3ab (1000Base-T) compliance on the Ethernet port
IEEE 802.3at
IEEE 802.3x
IEEE 802.3z
IEEE802.11a/b/g/n/ac (2x2 MIMO) support
One RS232 RJ-45 port for software management console function.
One DC Power Jack for external DC power supply.
One DC Power ON/OFF switch for external DC power supply only.
One Reset Button for Device Reset to Default functions.
Five single color LED’s:
LAN1
LAN2
To Next Page
Loading...
