Allied 595 - Page 17

Attaching the Loader to Your Tractor
(Continued)
6. W hen the hook is lined up, dump or roll back the bucket to lower or raise the subframe
upright to align with the mounting boot.
7. C o n tinue to drive the tractor forward until the subframe uprights are seated in the boot.
8. S ecure the subframe uprights with the bolts and washers. Torque to 500 ft-lbs.
IMPORTANT: When mounting for the first
time, the front hook bolts will have to be
tightened after positioning the hook
directly over the mounting boss (most
rearward position)._
9. R aise the loader and lock the support stand tubes into the up position.
15