Need help?Do you have a question about the Allmatic BIOS1 and is the answer not in the manual?
General| Brand | Allmatic |
|---|---|
| Model | BIOS1 |
| Category | Control Unit |
| Language | English |
Lists optional accessories for the control unit.
Details on connecting the motor to the control unit terminals.
Instructions for connecting the motor capacitor to the control unit.
Guidance on connecting limit switches to the control unit.
How to connect the main power supply to the control unit.
Connecting the courtesy light to the designated output terminals.
Connecting the flashing light to the control unit's output.
Connecting power to photocell receivers and transmitters.
Connecting safety edge contacts to the control unit inputs.
Connecting the normally closed contact of the opening photocell.
Connecting the normally closed contact of the closing photocell.
Connecting a normally closed stop button to the control unit.
Connecting an open command button to the control unit.
Connecting a close command button to the control unit.
Connecting a button for partial opening function.
Connecting a button for step-by-step operation.
Connecting the antenna signal and ground to the control unit.
Step-by-step guide for memorizing a single transmitter button.
Memorizing new buttons or transmitters using a hidden button.
Procedure for removing a single transmitter from memory.
Simple procedure for setting opening and closing limit positions.
Detailed procedure for setting slowing down positions for gate movement.
List and default values for base menu configuration parameters.
List and default values for advanced menu configuration parameters.
Detailed explanations of parameters in the base settings menu.
Detailed explanations of parameters in the advanced menu.
Indicates the status of inputs and safety devices via LEDs.
Describes the meaning of display codes during normal gate operation.
Lists common error codes and their causes for troubleshooting.
To Next Page
