Alltrax SR48500 User Manual

26
SR OPERATORS MANUAL
FAN COVER (OPTIONAL)
The XCT family of controllers also includes an optional Fan
Cover. This cover comes standard on the 500A & 600A controllers.
Installation:
1) Plug Fan Cover into
controller fan port. (See picture)
2) Fasten cover down with the
four (4) supplied screws.
Note: Make sure wires are
tucked out of the way and are
not being pinched by the cover.

Alltrax SR48500 Specifications

General

Brand	Alltrax
Model	SR48500
Category	Controller
Language	English