Alltrax SR48300 User Manual

ALLTRAX
www.alltraxinc.com
Alltrax Inc
1111 Cheney Creek Road, Grants Pass, OR 97527 Ph: 541-476-3565 Fax: 541-476-3566
Web Site: http://www.alltraxinc.com Twitter: @AlltraxInc
Operators Manual
SR
©ALLTRAX INC 2016 - All Rights Reserved

Alltrax SR48300 Specifications

General

Input Voltage	48V
Output Current	300A
Peak Current	600A
Regenerative Braking	Yes
Case Style	Aluminum
Type	DC Controller
Throttle Input	0-5V
Motor Type	Series Wound
Protection	Over Current

Summary

General Safety Warnings

Safety Precautions for Vehicle Work

Essential safety measures for working on electric vehicles and batteries.

Installation Guide

Resistor and Diode Installation

Guidance on mounting resistors and diodes for contactors.

Contactor and Resistor Selection

Contactor (Solenoid) Selection

Unacceptable Solenoid Types

Heavy and Extreme Duty Contactor Options

Heavy Duty Contactor Specifications

Extreme Duty Contactor Specifications

Fuse Selection and Installation

Fuse Rating Guidelines

Recommended fuse ratings based on controller amperage.

Wiring Best Practices

Wire Gauge Recommendations

Recommended wire gauges for different controller amperages.

Power and Signal Wiring Guidelines

User Personality Profiles

Controller Programming Procedures

Required Programming Tools

Controller Blink Codes and Error Definitions

Throttle Codes Explained

Codes indicating different throttle types recognized by the controller.

Error Code Definitions

Explanation of various error codes and their potential causes.