Alluris FMI-B20 User Manual

Bedienungsanleitung
Operation manual
Notice d’utilisation
Instrucciones de servcio
Istruzioni per l’uso
© Alluris GmbH & Co. KG
Subject to changes and
corrections without notice.
2016-04-13_EN
Operation Manual
Force Gauges FMI- S
FMI-B
FMI-B
FMI- S
Deutsche Version
English Version
Version française
Versione italiana
Versión española

Alluris FMI-B20 Specifications

General

Brand	Alluris
Model	FMI-B20
Category	Measuring Instruments
Language	English

Summary

Safety Precautions

Starting Operation

Preparing the Measurement

Steps to prepare for measurement, including sensor direction and attachments.

Turning the Instrument ON/OFF

How to power the instrument on and off, including self-test sequence.

Selecting the Operation Mode

Choosing between Standard, Peak +, Peak -, and Peak modes for measurement display.

Start/Stop Measurements

Guide on initiating, conducting, and completing force measurements.

Taring

Explanation of automatic and manual taring procedures to zero the gauge.

Displaying Measured Values

Clearing the Memory

Setting Measurement Parameters

Selecting the Parameter Menue

Accessing and navigating through various settings menus (P1-P4, PO).

General Settings (P1)

Customizing general functions like units, prefix, auto-stop, and auto-off.

Resetting Factory Defaults (PO)

Memory and Statistic Functions (P2)

Activating and managing memory for single values or series, and displaying statistics.

Monitoring Limit Values (P3 und P4)

Setting upper and lower limit values to monitor measurements and trigger signals.

Test Stand Application of Force Gauges

Technical Data