Allworx Connect 536 - Version: F Revised: June

Allworx
®
Connect™ Server Family Installation Guide
866.ALLWORX * +1 585 421 3850 Page 21
www.allworx.com
Version: F Revised: June 21, 2018
exiting the building.
Note:
Do not plug any network or ISP service into the server without first properly configuring the server.
Failure to heed this warning may result in a disruption of network connectivity with other equipment on
the network.
Network Port LED Definitions
Green LED State Amber LED State Description
Off Off
Red alarm state - no received signal.
On Off
No alarms or errors - good lock to line
On On
Amber alarm state - remote end error.
On Blinking
Signal quality problem - error.