Need help?Do you have a question about the Allworx 6x and is the answer not in the manual?
Overview of the steps involved in installing the Allworx 6x system.
Instructions for unpacking the Allworx 6x server and verifying all included parts.
Detailed descriptions of the LEDs, buttons, and slots on the front of the Allworx 6x chassis.
Detailed descriptions of the ports and connectors on the rear of the Allworx 6x chassis.
Guidance on how to install the Allworx 6x on a flat surface like a table or shelf.
Instructions and precautions for mounting the Allworx 6x unit securely on a wall.
Instructions for grounding the chassis and understanding the power-up sequence indicators.
Explanation of front panel light behavior when the Allworx 6x is in Safe Mode.
How to connect music-on-hold and overhead paging systems to the Allworx 6x audio ports.
Steps to install and configure a USB external hard drive for additional storage on the Allworx 6x.
Information on using compact flash cards for voicemail storage and system configuration.
Details on the connection and ratings of door relay and paging amplifier devices.
Steps to configure the door relay and paging amplifier functionality within the Allworx 6x system.
Details on connecting analog phone lines, handsets, and understanding port LED indicators.
Guidelines for connecting and configuring SIP phones with the Allworx 6x system.
Safety, disposal, and FCC Part 68 compliance information for the Allworx 6x.
Notices regarding Industry Canada certification and radio/television interference.
To Next Page
General
