Allworx Connect 536 - Introduction

Allworx
®
Connect™ Server Family Installation Guide
866.ALLWORX * +1 585 421 3850 Page 1
www.allworx.com
Version: F Revised: June 21, 2018
Chapter 1 Introduction
The Allworx ® Connect
TM
Server Family Installation Guide instructs Allworx administrators on the
setup and installation of the Connect server:
• unpacking the Connect server and accessories.
• mounting the Connect server:
• on a tabletop or shelf.
• in a rack.
• on a wall.
• performing electrical connections.
• configuring the Connect server.
• connecting the network ports.
• installing telephones.
• installing T1 (Connect server model 731 only).
• connecting accessories.
1.1 Who Should Read this Guide
This guide is for Allworx administrators that:
• install and maintain Allworx servers.
• understand computer networking and basic telephony.
• completed the Allworx Partner technical training.
1.2 Guide Purpose
The purpose this guide is to advise Allworx administrators on the set up, configuration, and installation
of a Connect server.
1.3 Guide Organization
This guide describes:
• requirements necessary to perform the operations described within the document.
• steps necessary to setup and install the Connect server.