Address: Room 201, Building 1, No,99, Lane 215, Gaoguang Road, QingPu District, Shanghai,
Figure 18 IP Address Information
CONFIG ICOM1 TCP 47.254.178.218 10001
This command uses for setting code of return port. Last 5 numbers should
ask form AllyNav engineer.
21
Figure 19 Setting Return Port
LOG ICOM1 RTCM1004 ONTIME 1
LOG ICOM1 RTCM1104 ONTIME 1
LOG ICOM1 RTCM1012 ONTIME 1
LOG ICOM1 RTCM1005 ONTIME 1
These commands require receiver output RTCM difference data.
These five commands could send together.
Interface should show as blow:
To Next Page
