AllyNav R30 - Page 22

SHANGHAI ALLYNAV TECHNOLOGY CO., LTD.
Address: Room 201, Building 1, No,99, Lane 215, Gaoguang Road, QingPu District, Shanghai,
Tel: 021-61200180
Web： www.allynav.com
Figure 20 Require receiver output RTCM difference data
SAVECONFIG
This command is saving the command which we send before into
receiver.
22
Interface should show as blow:
Figure 21 SAVECONFIG
Those are R30 configuration step. Please contact our company engineer if
there are any question.