To Next PageTo Next PageWhat to do if Alpha AS600M DC Drives show output earthing?
If your Alpha DC Drives are showing output earthing, check whether the motor insulation has become poor if the output earthing current exceeds the specified value. Also, check whether the connection line between the driver and the motor is damaged.
How to check for load short-circuit or output earthing short-circuit in Alpha AS600M?
To check for a load short-circuit or output earthing short-circuit in Alpha DC Drives, verify whether the connection cable between the driver and the motor is damaged if the driver output load is short-circuited. If the output side earthing is short-circuited, check the motor coil resistance and the motor insulation.
General| Cooling Method | Forced air cooling |
|---|---|
| Output Current | 600A |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit |
| Communication Interface | Modbus RTU |
| Storage Temperature | -20°C to 60°C |
| Relative Humidity | 5% to 95% (non-condensing) |
Detailed instructions for connecting the main power and motor circuits to the driver.
Guidance on wiring the control signals and communication interfaces for the driver.
Detailed parameters for the basic functions of the AS600M driver.
Parameters for configuring input/output terminals and communication settings.
Parameters for analog and pulse signal inputs and outputs.
Parameters for configuring motor characteristics and settings.
Parameters for configuring communication via the MODBUS protocol.
Parameters for driver protection features and fault handling.
Configuration and control of input/output terminals for various functions.
Guide to identifying and resolving common faults, error codes, and protection states.
Explains warning codes, their meaning, and how the driver behaves during warnings.
Troubleshooting guide for common motor faults and their corrective actions.
Procedures for routine inspection and maintenance to ensure driver reliability.
Overview of setting up a MODBUS communication network with multiple drivers.
Technical details of the RS-485 communication interface and parameters.
Instructions for setting communication parameters via the keypad.
Description of supported MODBUS command codes and their functions.
Explains the meaning of various abnormality codes encountered during MODBUS communication.
