To Next PageTo Next Page
Need help?Do you have a question about the Alpha E-Tec 20R and is the answer not in the manual?
Detailed performance specifications for natural gas operation.
Detailed performance specifications for LPG operation.
Boiler dimensions, clearances, weights, and connection sizes.
Wiring diagrams and connection details for electrical components.
Diagram illustrating the internal layout and components of the boiler.
General guidance and regulations for installing the flue system.
Regulations and recommendations for positioning the flue terminal.
Specifies essential clearances around the boiler for installation and servicing.
Instructions for preparing the wall for boiler mounting and flue entry.
Step-by-step guide for securely mounting the boiler onto the bracket.
Instructions for connecting system pipework to the boiler's unions.
Procedures for installing the flue system, including length adjustments.
Detailed steps for connecting the boiler to the electrical mains supply.
Guidance on installing optional Alpha boiler control systems.
General advice and procedures for connecting various boiler controls.
Steps for filling the central heating system with water.
Critical safety procedures for testing gas connections and purging the system.
Step-by-step guide for the first startup and commissioning of the boiler.
Procedure for checking and adjusting boiler combustion performance.
Concluding actions required to complete the commissioning process.
Essential information to provide to the user upon completion.
Detailed steps for calibrating the CO2 levels for optimal combustion.
Guide for configuring the boiler's electronic control parameters.
Steps for performing and recording a combustion analysis.
Critical safety and preparatory steps before commencing service.
Procedures for gaining access to the boiler's internal components for servicing.
Maintenance steps for cleaning key internal parts of the boiler.
Instructions for cleaning the primary heat exchanger.
Steps for reassembling the boiler after servicing and cleaning.
Steps to access internal components for replacement.
A detailed diagram showing all electrical connections and components.
Lists error codes, fault descriptions, and possible causes.
General
