Alpha InTec2 26CE User Manual

Installation and Servicing
Instructions
InTec² 26CE, 30CE and 35CE
Wall Mounted, Fan Assisted, Room Sealed,
Gas Fired, High Efficiency Condensing Combination Boiler
Nepicar House, London Road,
Wrotham Heath, Sevenoaks,
Kent TN15 7RS
For Technical help or for Service call ...
ALPHA HELPLINE Tel: 0844 871 8764
website: www.alpha-innovation.co.uk
Set for use with Natural Gas
Leave these instructions with the User
0051
These instructions have been carefully prepared but we reserve the right
to alter the specification at any time in the interest of product improvement.
© Alpha Therm Limited 2015.
Part No. 1.035665 ST.001836/000
0415/D346
Alpha InTec² 26CE G.C. No. 47 532 66
Alpha InTec² 30CE G.C. No. 47 532 67
Alpha InTec² 35CE G.C. No. 47 532 68

Alpha InTec2 26CE Specifications

General

Manufacturer	Alpha
Model	InTec2 26CE
Category	Boiler
Output	26 kW
Type	Condensing
Mounting	Wall-mounted
ERP Rating	A
DHW Output (kW)	26 kW
Fuel	Natural Gas
CH Output (kW)	26 kW

Summary

1 Introduction

Boiler Description and Installation Overview

Introduction to the InTec² boilers, their features, and essential installation requirements.

2 Technical Data

Performance Specifications (Natural Gas & LPG)

Detailed technical performance data for both natural gas and LPG operation.

4 Installation Procedures

Pipework, Flue, and Control Connections

Instructions for connecting all necessary pipework and fitting the flue and controls.

5 Commissioning the Boiler

System Filling, Operation, and Checks

6 Routine Servicing

Servicing Procedures and Component Cleaning

7 Component Replacement

8 Wiring Diagrams

9 Error Codes and Fault Finding

Troubleshooting Guide and Error Code List

Steps for initial fault diagnosis and troubleshooting using error codes.

Benchmark Commissioning Checklist

Service Record

Important Notes and Safety

Location, Safety, and Regulatory Compliance