To Next PageTo Next Page
Need help?Do you have a question about the Alpha Evoke 28NX and is the answer not in the manual?
General| Boiler Type | Combi |
|---|---|
| Mounting | Wall Mounted |
| ERP Heating Efficiency | 93% |
| DHW Output (kW) | 28 |
| Output | 28 kW |
| Efficiency | 93% |
| Fuel | Natural Gas |
| Type | Combi |
Details the Evoke boiler models and provides contact information for support.
Outlines installer duties, standards of work, and customer service guidelines.
Overview of boiler features, approved gas types, and installation regulations.
Explains safety symbols and required personal protective equipment.
Details performance metrics for both Natural Gas and LPG fuel types.
Physical specifications, installation clearances, and flue requirements.
Details on pump functionality and performance curves.
Details mains connection, wiring requirements, and safety.
Explains the information displayed on the boiler's data badge.
Visual guide to boiler components and a list identifying them.
Guidelines for gas, electrical, and air supply connections.
Covers flue system setup, lengths, bends, and configuration options.
Specifies minimum distances and considerations for flue terminal placement.
Rules for flue proximity to boundaries and boiler installation location.
Design considerations for the central heating system and filling steps.
Procedures for flushing the heating system and managing condensate.
Details on DHW flow rate, pressure, hardness, and pipework.
Initial steps including unpacking, required clearances, and wall preparation.
Securing the boiler to the bracket and making hydraulic connections.
Steps for installing the flue turret and ensuring proper sealing.
Calculating flue length and assembling flue sections.
Details on fitting the flue from inside or outside the building.
Rules for flue extensions and specific assembly for side flues.
Options for managing flue plume emissions.
Electrical hookup and fitting of optional external controls.
Setup for various control types and external temperature sensors.
Essential commissioning steps including system filling and gas safety checks.
How to start the boiler and select operating modes.
Details on solar and weather compensation operating modes.
Explains core operational functions, priority, frost protection, and pump cycle.
Post-installation checks, final assembly, and user information handover.
Viewing boiler status data and converting the unit for LPG fuel.
Steps for adjusting CO2 levels for optimal combustion.
How to access and navigate the programming menu.
Lists and explains all configurable parameters.
Key checks and performance testing during routine service.
Notes before servicing and steps to remove casing panels.
Steps for preparing the boiler and cleaning internal parts.
Procedures for replacing manifold seals and reassembling the boiler.
Visual guide showing the location of various boiler components.
Procedures for accessing, draining, and replacing electrodes, burner, and fan.
Procedures for replacing electronic, sensor, and gas valve components.
Procedures for replacing water-related components.
Procedures for replacing various other components.
Procedures for replacing diverter valve, expansion vessel, and insulation.
The main electrical diagram and its key for understanding connections.
Initial checks and a table of error codes with causes.
List of boiler parts with their corresponding Alpha part numbers.
Specific technical data for both Evoke boiler models.
Energy efficiency labels and data for both boiler models.
Guidance on calculating seasonal space heating energy efficiency.
Instructions for completing the room heating system assembly chart.
Specific parameters required for assembly chart calculations.
Guidance on calculating domestic hot water energy efficiency.
Key points to check for installation and operation compliance.
Details about the service engineer and recording maintenance history.
Key installation and safety considerations.
Adjusting DHW temperatures and using weather compensation.
Initial boiler startup, mode selection, and explanation of operation.
