EasyManua.ls Logo

Alpine Spas FUJI - Startup and Refill Procedures; Installing Filter Cartridges

Default Icon
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
5. STARTUP & REFILL PROCEDURE
INSTALLING THE FILTER CARTRIDGES - FLOATING WEIR SKIMMER
FUJI,COLORADO,NEPAL,UTAH,NORDIC,ALASKA,YUKON
Filter(s)arefoundinsidethespapoolbutarenotpre-installed.
Grabthetoplidwithtwohands,
applylightdownwardspressure
andtwistanti-clockwisetodetach
(canbequitestiff).
Insertthelterandplaceitover
thecircularholdingpiecesoitsits
tight.
Liftoffthelidtorevealthebasket
grillunderneath.
Insertthebasketgrillintothetop
ofthelter,liningupthecircular
hole.
Liftoutthebasketgrillandplace
aside.
Pressthebasketdowngentlyto
ensureatightt.
Insidetheskimmerbox,seethe
circularholdingpiecethatthe
ltercartridgewillsitover.
Replacethetoplidbygently
puttingdownwardspressurewhile
turningclockwise,untilitsnaps
backintoplace.
1
4
7
2
5
8
3
6
AVOID DAMAGE TO SPA POOL & VOIDING WARRANTY - ONLY
USE FILTER CARTRIDGES PURCHASED FROM ALPINE SPAS.