Why is my Alpine Spas Hot Tub not heating up?
If your Alpine Spas Hot Tub isn't heating, make sure it's not in rest, away, or sleep mode. Switch it to ready or normal mode. Also, increase the set temperature.
What to do if my Alpine Spas Hot Tub has no power?
If your Alpine Spas Hot Tub has no power, first check that the RCD is turned on. Then, have an electrician check the plug and wire connections.
What to do if my Alpine Spas Hot Tub doesn’t reach set temperature?
If your Alpine Spas Hot Tub doesn’t reach the set temperature, it might be in rest, away, or sleep mode. Change the mode to ready or normal.
Why does the RCD trip on my Alpine Spas Hot Tub?
If your Alpine Spas Hot Tub RCD trips, have an electrician check that the wiring is correct and matches the diagram. It could also be a component failure, so call for service.
How to fix low jet pressure in my Alpine Spas Hot Tub?
If you have low jet pressure in your Alpine Spas Hot Tub, turn the jet face anti-clockwise to open it. If you have a 2-Speed Pump, press the jet button again to enter high speed.
What to do if there is no jet pressure in my Alpine Spas Hot Tub?
If there's no jet pressure in your Alpine Spas Hot Tub, try priming the pump by pressing the jets button on and off 2-3 times in sequence. Also, bleed the pump by loosening the barrel union.
Why are the speakers not working on my Alpine Spas Hot Tub?
If the speakers aren't working on your Alpine Spas Hot Tub, ensure the Bluetooth light is activated when pressing the on button. Also, remove any protective case from your device and try again, as it may be interfering.
How to fix a blank display on my Alpine Spas Hot Tub?
If the display on your Alpine Spas Hot Tub is blank, switch the spa pool off and on again.
Why does my Alpine Spas Hot Tub emit a high pitch ringing noise?
If your Alpine Spas Hot Tub emits a high-pitched ringing noise, check for leaking around the UV chamber and replace the UV bulb if necessary, as this indicates a UV system alarm because the bulb has failed.
Emphasizes the critical need to read and adhere to all safety guidelines before installation and use.
Details critical safety warnings, dangers, and cautions regarding electrical supply, water temperature, and usage.
Step-by-step guide on preparing the spa pool before filling it with water.
Alerts users to the critical importance of maintaining the correct water level to prevent component damage.
Guidance on electrical connections and powering up, emphasizing licensed electrician use.
Instructions for installing filter cartridges for both floating weir and grate skimmer types.
Details the automatic startup sequence, priming mode, and initial heat-up process.
Explains the importance of water balance and sanitization for spa pool health and component longevity.
Guides on operating the spa pool, including display understanding and changing temperature settings.
Step-by-step guide on how to operate the external drain valve to empty the spa pool.
Procedures for quick cleaning (weekly) and soaking (monthly) of spa pool filter cartridges.
A schedule outlining weekly, monthly, and 3-4 monthly cleaning and maintenance tasks.
Guidance on checking spa pool pumps for efficiency, leaks, and corrosion, and what to do if issues are found.
Instructions on checking and tightening barrel unions to prevent leaks and ensure proper component connection.
Information on the required frequency and procedure for replacing the UV system bulb.
Contact details for email and phone support, including operating hours for technical assistance.
A guide to diagnosing and resolving common issues with spa pool operation, water, and components.
Explanation of error messages displayed on the topside control panel and required actions.
General| Brand | Alpine Spas |
|---|---|
| Model | SIERRA |
| Category | Hot Tub |
| Language | English |
To Next Page