11-EN
Blackout Mode On and Off
CDA-7977 only
When the Blackout mode is turned on, the display
will turn off to reduce power consumption.
This additional power enhances the sound quality.
1 Press and hold the B.OUT button for at least 3
seconds to start the blackout mode. By doing so
the display will turn off.
NOTE
If any button on the unit is pressed during the blackout
mode, the function will be displayed for 5 seconds to
show the operation before returning to Blackout mode.
To cancel the blackout mode, press and hold the
B.OUT button for at least 3 seconds.
Switching the Display Modes
CDA-7977/CDA-7876 only
You can select the display pattern mode from
three display patterns. You can also deactivate the
display.
1 Press the DISP (DISPLAY) button to select the
desired Display pattern mode.
Each press changes the display patterns.
→ Pattern1 → Pattern2 → Pattern3 → Display OFF
Changing the Audio Level Display
Pattern
CDA-7875/CDA-7873 only
You can select the Audio Level Display from three
display patterns. You can also deactivate the
display.
1 Press DISP button to switch the display pattern.
→ Pattern1 → Pattern2 → Pattern3 → OFF
To Next Page
Loading...
