EasyManua.ls Logo

Alpine cda-7873 - Specifications

Alpine cda-7873
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27-EN
Specifications
FM TUNER SECTION
Tuning Range 87.7 – 107.9 MHz
Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio 80 dB
Stereo Separation 45 dB
Capture Ratio 2.0 dB
AM TUNER SECTION
Tuning Range 530 – 1,710 kHz
Sensitivity (IEC Standard) 22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response 5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)
REMOTE CONTROL (CDA-7977/CDA-7876/CDA-
7875 only)
Battery Type AAA batteries (2 pcs.)
Width 42 mm (1-21/32")
Height 121 mm (4-25/32")
Depth 23 mm (29/32")
Weight 50 g (1.8 oz)
GENERAL
Power Requirement 14.4 V DC
(11–16 V allowable)
Maximum Power Output 60 W × 4 (CDA-7876/CDA-
7875/CDA-7873 only)
Maximum Pre-Output Voltage 5 V/10 k ohms (CDA-7977
only)
2V/10k ohms (CDA-7876/
CDA-7875/CDA-7873 only)
Maximum Subwoofer Output
Voltage 4 V/10 k ohms (CDA-7876/
CDA-7875/CDA-7873
only)
2V/10k ohms (CDA-7876/
CDA-7875/CDA-7873 only)
Weight 1.5 kg (3 lbs. 5 oz)
CHASSIS SIZE
Width 178 mm (7")
Height 50 mm (2")
Depth 155 mm (6-1/8")
NOSEPIECE SIZE
Width 170 mm (6-11/16")
Height 46 mm (1-13/16")
Depth 24 mm (15/16")
Due to continuous product improvement, specifications and
design are subject to change without notice.
Indication for XM Radio Mode
The XM antenna is not connected to the XM radio
module.
- Check whether the XM antenna cable is attached
securely to the XM radio module.
Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
XM signal is too weak at the current location.
- Wait until the car reaches a location with a stronger
signal.
Radio is acquiring audio or program information.
- Wait until the radio has received the information.
The channel currently selected has stopped
broadcasting.
- Select another channel.
The user has selected a Channel Number that does not
exist or is not subscribed to.
- The unit will revert back to the previously selected
channel.
There is no artist name/feature, song/program title, or
additional information associated with the channel at
that time.
- No action needed.
ANTENNA
UPDATING
LOADING
NO SIGNL
OFF AIR
– – – –

Table of Contents

Related product manuals