Alpine CDA-9833R User Manual

27-EN
Setting the Multicolour Illumination
You can change the lighting colour of the following four buttons :
SOURCE/POWER, BAND/TEL, g and f.
1
Press MENU to select Illumination.
2
Press g or f to select your desired colour.
BLUE ↔ GREEN ↔ AMBER ↔ RED ↔ (USER'S*) ↔ BLUE
*You can use your desired colours as shown below if you have
already registered to USER'S.
If you want to use colours other than the above
3
Turn the Rotary encoder to select colours (1
through 512).
Each press of BAND/TEL. advances the colour number by
30.
1
..............
19
..............
184
..............
363
..............
512
(Red) (Amber) (Green) (Blue)
To store the setting contents
1) Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6).
The setting contents are stored.
To recall the stored colour setting
1) While setting the mode, press any one of the preset
buttons (1 through 6).
The stored setting contents are recalled.
4
When adjustment has been completed, press and
hold MENU for at least 2 seconds to return to
normal mode, or press MENU and select
RETURN to return to normal mode.
• “No Memory” is displayed if a preset that has not been stored is
recalled.
Changing the Lighting Colour of All the
Buttons
You can change the lighting colour of the unit.
1
Press MENU to select Illumination.
2
Press SOURCE/POWER.
The lighting colour of all the buttons are changed.
AMBER ON ↔ AMBER OFF (Green)
3
When adjustment has been completed, press and
hold MENU for at least 2 seconds to return to
normal mode, or press MENU and select
RETURN to return to normal mode.
• SOURCE/POWER, BAND/TEL, g and f buttons are
changed to that which you have set above in “Setting the
Multicolour Illumination (this page).”
Verifying the Software Version
Current version software can be verified in the display.
1
Press and hold MENU for at least 2 seconds.
2
Press MENU to select Information.
The version is displayed.
3
Press and hold MENU for at least 2 seconds to
return to normal mode, or press MENU and select
RETURN to return to normal mode.

Alpine CDA-9833R Specifications

General

Brand	Alpine
Model	CDA-9833R
Category	Car Receiver
Language	English