EasyManuals Logo

Alpine CDA-9833R User Manual

Alpine CDA-9833R
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
37-EN
NO MAGAZINE
•No magazine is loaded into the CD Changer.
- Insert a magazine.
NO DISC
•No indicated disc.
- Choose another disc.
Specifications
FM TUNER SECTION
Tuning Range 87.5 – 108.0 MHz
Mono Usable Sensitivity 0.7 µV
Alternate Channel Selectivity 90 dB
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB
Capture Ratio 2.0 dB
MW TUNER SECTION
Tuning Range 531 – 1,602 kHz
Sensitivity (IEC Standard) 25.1 µV/28 dB
LW TUNER SECTION
Tuning Range 153 – 281 kHz
Sensitivity (IEC Standard) 31.6 µV/30 dB
CD SECTION
Frequency Response 5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)
PICKUP
Wave length 795 nm
Laser power CLASS I
REMOTE CONTROL
Battery Type AAA” sized dry battery
Battery Quantity 2
Dimensions (W × H × D) 42 mm (1-21/32")
× 121 mm (4-25/32")
× 23 mm (29/32")
Weight (without battery) 50 g (1.8 oz)
GENERAL
Power Requirement 14.4 V DC
(11–16 V allowable)
Power Output 60 W × 4
Maximum Pre-Output Voltage 4 V/10k ohms
Weight 1.6 kg (3 lbs. 8 oz)
CHASSIS SIZE
Width 178 mm (7")
Height 50 mm (2")
Depth 152 mm (6")
NOSEPIECE SIZE
Width 170 mm (6-11/16")
Height 46 mm (1-13/16")
Depth 18 mm (11/16")
Due to continuous product improvement, specifications and design
are subject to change without notice.
CAUTION
(Bottom side of player)
CLASS 1
LASER PRODUCT

Table of Contents

Other manuals for Alpine CDA-9833R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alpine CDA-9833R and is the answer not in the manual?

Alpine CDA-9833R Specifications

General IconGeneral
BrandAlpine
ModelCDA-9833R
CategoryCar Receiver
LanguageEnglish

Related product manuals