CDA-9853R
No. Symbol I/O Terminal Description
66 LCD CLK O Clock signal output terminal to LCD DRIVER.
67 LCD CS1 A O CE signal output terminal to LCD DRIVER.
68 LCD A0 A O Address bus selection signal output terminal to LCD DRIVER.
69 LCD DI A O Serial data output terminal to LCD DRIVER.
70 LCD RESET O Reset output terminal to LCD DRIVER.
71 AVdd - Power supply terminal for A/D converter.
72 AVss - GND terminal for A/D converter.
73 AVref I Reference voltage input terminal for A/D converter.
74 NC - No connect terminal.
75 SR1
76 SR2
77 SR3
78 SR4
79 SR5
80 SR6
81 SR7 I Click input terminal of SLIDER.
82 KEY-IN1
83 KEY-IN2
84 KEY-IN3
85 NC - No connect terminal.
86 NMI(PULL-UP) - Pull-up connect terminal.
87 NC - No connect terminal.
88 F-START I Communication frame input terminal from Main u-COM.
89 NC - No connect terminal.
90 ACTION IND O ACTION IND CONT output terminal.
91 SLIDER CONT O SLIDER-LED control terminal.
92 NC - No connect terminal.
93 RED-LED O RGB circumference light control terminal.
94
95
96 RGB RST O RGB RESET output terminal.
97 RGB CS O RGB Chip Select output terminal.
98 RGB DATA O RGB serial data output terminal.
99 RGB CLK O RGB serial clock output terminal.
100 ENCODER-2 I ENCODER input terminal.
NC - No connect terminal.
I Touch Sensor input terminal of SLIDER.
I A/D converter input terminal.
To Next Page
Loading...
