Alpine CDA-9855R - IC104 Terminal Details

CDA-9855R
No. Symbol I/O Terminal Description
96 MP I Multi-Path signal input terminal.
97 AFC I AFC signal input terminal.
98 SSTOP I SEEK STOP input terminal.
99 S/M I TUNER S/M level input terminal.
100 NOSE DET I NOSE installation detect terminal.
D70F3261YGC :
IC4011
No. Symbol I/O Terminal Description
1 AVREF0 - Reference voltage input terminal for A/D Converter.
2 AVSS - GND terminal for A/D Converter.
3 DIMMER-OUT1
4 DIMMER-OUT2
5 AVREF1 - Power supply terminal for A/D Converter.
6 A20
7 A21
8 IC/FLMD0 I Vdd connect terminal.
9 VDD - Power supply terminal for Clock.
10 REGC - Capacitor connect terminal for Regulator.
11 VSS - GND terminal for Clock.
12 X1
13 X2
14 RESET I System reset input terminal.
15 XT1(GND) - GND connect terminal.
16 XT2(NC) - No connect terminal.
17 NMI(PULL-UP) I Non-maskable interruption request input terminal. (Pull-up)
18 YD I OELD frame signal taking-in interruption input terminal.
19 F-START I Communication frame interruption input terminal from Main u-COM.
20 ALL-H O OELD display control output terminal.
21 LPA I OELD frame signal input terminal.
22 Front-SI I Serial data input terminal from Main u-COM.
23 Front-SO O Serial data output terminal to Main u-COM.
24 Front-CLK O Communication synchronous CLK output terminal to Main u-COM.
25 AMB CONT O Amber light control terminal.
26 SR1
27 SR2
28 SR3
29 SR4
30 SR5
31 SR6
32 SR7 I Click input terminal of SLIDER.
33 EVSS - GND terminal for Bus Interface.
34 EVDD - Power supply terminal for Bus Interface.
35 GRN CONT O Green light control terminal.
36 NC - No connect terminal.
37 ACTION IND O ACTION IND control terminal.
38 RED-CONT O RGB circumference light control terminal.
DIMMER level control output terminal.
External ROM address port terminal.
Crystal connect terminal. (5MHz)
Touch Sensor input terminal of SLIDER.
-
I
-
O