Alpine CDE-133BT User Manual

11-EN
Listening to Radio
1 Press SOURCE to select TUNER mode.
2 Press BAND repeatedly until the desired radio band is
displayed.
F1 (FM1)  F2 (FM2)  F3 (FM3)  MW  LW  F1 (FM1)
3 Press TUNEA.ME to select the tuning mode.
DX SEEK (Distance mode)  SEEK (Local mode)  off (Manual
mode)  DX SEEK
Note
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4 Press  or  to tune in the desired station.
Holding down  or  will change the frequency
continuously.
Presetting Stations Manually
1 Select the radio band and tune in a desired radio station
you wish to store in the preset memory.
2 Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish to store
the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
Notes
• A total of 30 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2, FM3, MW and LW).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Presetting Stations Automatically
1 Press BAND repeatedly until the desired radio band is
displayed.
2 Press and hold TUNEA.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will automatically
seek and store 6 strong stations in the selected band. They will
be stored into preset buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
Note
• If no stations are stored, the tuner will return to the original station you
were listening to before the auto memory procedure began.
Tuning to Preset Stations
1 Press BAND repeatedly until the desired band is
displayed.
2 Press any one of the station preset buttons (1 through 6)
that has your desired radio station in memory.
The display shows the band, preset number and frequency of
the station selected.
Frequency Search Function
You can search for a radio station by its frequency.
1 Press ENTER in Radio mode to activate Frequency
search mode.
The “” indicator lights up.
2 Turn the Rotary encoder to select the desired frequency.
3 Press ENTER to receive the selected frequency.
Note
•Press  in the search mode to cancel. Or, the search mode will be
cancelled if no operation is performed for 10 seconds.
Radio


SOURCE/
TUNE/A.ME
BAND
Rotary encoder
ENTER

Preset buttons
(1 through 6)

Alpine CDE-133BT Specifications

General

MP3 playback	No
CD-R playback	Yes
Playback disc formats	CD audio
Audio formats supported	MP3
FM band range	87.5 - 108 MHz
LW band range	153 - 281 kHz
Supported radio bands	FM, LW, MW
Preset stations quantity	18
RDS features	TA, TP
Product color	Black
CD changer capacity	1 discs
Disc types supported	CD, CD-R, CD-RW
Audio output channels	4.0 channels
Equalizer bands quantity	7
Signal-to-Noise Ratio (SNR)	105 dB
Display type	LCD
Bluetooth version	3.0+HS
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Headphone connectivity	3.5mm
Apple docking compatibility	iPhone, iPod
RMS rated power	200 W
File format system	FAT32
Power requirements	14.4V DC, 11-16V
Operating temperature (T-T)	-10 - 60 °C

Weight and Dimensions

Weight	1500 g
Dimensions (WxDxH)	178 x 161 x 50 mm