Alpine CDE-133BT User Manual

12-EN
Turning AF (Alternative Frequencies) ON/OFF
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1 Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP selection mode.
2 Turn the Rotary encoder to select the “TUNER” setup
mode, and then press ENTER.
3 Turn the Rotary encoder to select the “AF”, and then press
ENTER.
4 Turn the Rotary encoder to select the AF (Alternative
Frequency) ON or OFF mode.
5 Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
• When the AF ON mode is selected, the unit automatically tunes to a
strong signal station in the AF list.
• Use the AF OFF mode when automatic re-tuning is not required.
•Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
The RDS digital data includes the following:
Receiving RDS Regional (Local) Stations
1 Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP selection mode.
2 Turn the Rotary encoder to select the “TUNER” setup
mode, and then press ENTER.
3 Turn the Rotary encoder to select the “REGIONAL”, and
then press ENTER.
4 Turn the Rotary encoder to select ON or OFF.
In the OFF mode, the unit automatically keeps receiving the
related local RDS station.
5 Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
PI SEEK Setting
1 Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select the TUNER mode, and
then press ENTER.
3 Turn the Rotary encoder to select PI SEEK, and then press
ENTER.
4 Turn the Rotary encoder to select ON or OFF.
5 Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the Time to automatically Adjust
When you set to ON, the time is automatically adjusted by RDS data.
1 Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP selection mode.
2 Turn the Rotary encoder to select “TUNER”, and then press
ENTER.
3 Turn the Rotary encoder to select “AUTO CLOCK”, and
then press ENTER.
4 Turn the Rotary encoder to select A-CLOCK ON or
A-CLOCK OFF.
RDS
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement


BAND/TA
AUDIO/SETUP
Rotary encoder
/ENTER

VIEW

Alpine CDE-133BT Specifications

General

MP3 playback	No
CD-R playback	Yes
Playback disc formats	CD audio
Audio formats supported	MP3
FM band range	87.5 - 108 MHz
LW band range	153 - 281 kHz
Supported radio bands	FM, LW, MW
Preset stations quantity	18
RDS features	TA, TP
Product color	Black
CD changer capacity	1 discs
Disc types supported	CD, CD-R, CD-RW
Audio output channels	4.0 channels
Equalizer bands quantity	7
Signal-to-Noise Ratio (SNR)	105 dB
Display type	LCD
Bluetooth version	3.0+HS
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Headphone connectivity	3.5mm
Apple docking compatibility	iPhone, iPod
RMS rated power	200 W
File format system	FAT32
Power requirements	14.4V DC, 11-16V
Operating temperature (T-T)	-10 - 60 °C

Weight and Dimensions

Weight	1500 g
Dimensions (WxDxH)	178 x 161 x 50 mm